Your Position: Home > News

Grouting Plant
Grout Mixer and Agitator
Grout Pump
Plaster Machine
HydroSeeders
Refractory Gunite/Mixer
Shotcrete Machine
Industrial Peristaltic Pump
Foam Concrete Machine
Concrete Mixer
Concrete Pump
hydraulic pump station
Customized Service
Air Compressor

Phone/Wechat

+86-18538591025

Whatsapp

+86-18538591025

Email

sales@leadcrete.com

ADDRESS

Xisihuan Ring-Road East, Tielu, Xiliu Lake sub-district, Zhongyuan District, Zhengzhou, Henan China

High pressure jet grouting equipment

2026-11-18 14:46:28

High pressure jet grouting equipment

High pressure jet grouting equipment must coordinate fluid delivery with the movement of the jetting tools. A pump can provide the required outlet duty while the overall process remains unsuitable if the drill string, withdrawal control or grout supply cannot support the approved treatment procedure.

The purchasing task is therefore to define a compatible jet grouting system. The drilling rig, mixing plant, pump, fluid passages and monitoring arrangement each perform a different function, but their operating conditions must work together.

Define the process through the drill string

The selected jetting method determines which fluids must reach the treatment zone. Single-fluid systems use grout, double-fluid systems combine grout and air, and conventional triple-fluid systems use separate water, air and grout circuits.

This affects more than the number of pumps. The rotary connection, drill rods and jet grouting monitor must provide the passages and connections required by the selected method.

Confirm tooling compatibility before selecting individual machines. A jet grouting drilling rig may provide suitable movement and torque without its proposed drill-string package necessarily including every fluid circuit required by the project.

Specify the intended drilling method, treatment depth and jetting arrangement together. Equipment limits should be checked for that combination rather than inferred from a general drilling-depth rating.

high pressure jet grouting equipment


Match fluid delivery with withdrawal

Grout delivery and tool withdrawal jointly influence the amount of grout introduced over a treatment length. At a constant flow, slower withdrawal introduces more grout per metre; at a constant withdrawal rate, changing flow changes that quantity.

For steady operation, delivered grout volume per unit length can be expressed as:

Grout volume per metre = grout flow rate ÷ withdrawal rate

Using litres per minute and metres per minute gives litres per metre. This is a planning relationship, not a prediction of column diameter or retained binder content. Interruptions, return material and ground behaviour also affect the treatment process.

The high pressure jet grouting pump and rig should therefore provide operating ranges that support the approved combination of flow, pressure, rotation and withdrawal. Selecting the highest pump output does not establish the correct treatment conditions.

Actual construction settings should follow the project design and approved trial programme.

high pressure jet grouting pump


Prepare grout at the rate the operation requires

The grout mixing plant supports jetting by supplying the specified material in sufficient quantity and condition. Its practical output includes charging, mixing and transfer, rather than only the time during which the mixer operates.

Review the expected jetting periods and pauses when sizing the preparation and holding arrangement. A system that supplies one short operating period may not sustain repeated production cycles without interruption.

Leadcrete publishes mixing plants that prepare cement or bentonite slurry and transfer it to downstream equipment. It also publishes diesel-driven high-pressure pumping equipment. These provide equipment options, but their combined suitability requires a project-specific review.

Identify the required pump inlet conditions and the permitted handling time of the grout. Increasing storage alone does not resolve an unsuitable preparation rate or material holding procedure.

Record operating conditions against depth

Jet grouting instrumentation should allow the project team to relate fluid delivery to the position and movement of the tools. A pump pressure reading without depth and withdrawal information gives only part of the operating record.

Depending on the method and project requirements, recorded parameters may include grout pressure and flow, rotation, withdrawal rate, depth, and the relevant air or water measurements.

Define the measurement locations. Pump-outlet pressure and pressure measured near the rig describe different points in the delivery route. Likewise, a local display does not automatically provide a stored record that can be reviewed by treatment element and depth.

Leadcrete’s published rig information includes displays associated with rig alignment, rotation and lifting. A complete recording package, sensor arrangement and data export function should be specified separately where required.

jet grouting system


Include return flow and site handling in the arrangement

Jetting produces return material that must have an appropriate route to the surface and a planned collection arrangement. The drilling and tooling configuration should support the return conditions established by the approved method.

Include spoil handling, hoses, water supply and access for material replenishment when reviewing the site layout. These supporting operations affect whether the selected soil improvement equipment can carry out repeated treatment cycles.

Unexpected return conditions should be handled under the project’s monitoring and response procedure. Equipment capacity should not be used as a reason to continue outside that procedure.

high pressure injection grouting pump


Define the package before requesting a quotation

A coordinated quotation should identify which supplier provides the rig, fluid tooling, preparation plant, high-pressure delivery assembly and instrumentation. Connection details and control responsibilities should be agreed across those boundaries.

For a Leadcrete enquiry, provide the jetting method and treatment geometry, ground information and trial requirements, specified fluid duties, site access and utilities, and required monitoring records.

Container type jet grouting pump


Contact
sales@leadcrete.com to discuss high pressure jet grouting equipment for your proposed construction process.

■ Inquiry
Your name :
Your tel :
* Your mail :
Your company :
Your country :
* Inquiry :
Get Price Now!