LH50-558B industrial peristaltic squeeze hose pump consists mainly of pump house, rotor, roller, idle roller, squeeze tube and driving unit. The squeeze hose is U-shape in pump house, when rotor drives roller to rotate, hose is deformed. After the roller rotate, the deformed hose recover by its elasticity. Thus the negative pressure in this hose is generated, sucking slurries, and discharging through outlet under roller's push, finally forms pressure conveying of slurries.

Based on different characteristic pumping materials, LH50-558B squeeze hose pump could provide NR, NBR and EPDM different materials squeeze hose.

Working principle of industrial peristaltic squeeze hose pump:

When the rotor unit drives single roller to rotate, hose is squeezed and deformed. After the roller rotate, the deformed hose recover by its elasticity. Thus the negative pressure in this hose is generated, sucking slurries, and discharging through output under rollers’ push, finally forms pressure conveying of slurries.

► Application:

LH series industrial hose pump are mainly applied in distant conveying, grouting and dosing of viscous slurries in construction, mining, food, papermaking, ceramic, etc.

LH series peristaltic squeeze hose pump can be used in following field: Construction, pharmacy, textile mill, dye making, water treatment, paper making, mining, ceramic, brewery and beverage, underground engineering, etc. It's perfect to pump corrosive, abrasives, shear sensitive fluids, high viscosity fluids, high density fluids, large solids, metering(±1%), high pressure(3Mpa).

► Features:

LH50-558B industrial peristaltic squeeze hose pump is a new hose pump produced by Leadcrete, which absorbs advanced technology at home and abroad. LH50-558B hose pump has more advantages than traditional other types of pumps.

The characteristics of the LH50-558B industrial peristaltic squeeze hose pumps are as follows:

1. No seals

2. No valves

3. Self -priming

4. Only tube to replace

5. Dry running without damage

6. Reversible

7. No contact between product and mechanical parts

8. Able to pump products with solid parts inside

9. Easy maintenance, low-cost, short down time