Your Position: Home > Products > Grout Pump

Shotcrete Machine
Refractory Gunite/Mixer
Concrete Pump
Grouting Plant
Grout Mixer and Agitator
Grout Pump
Industrial Peristaltic Pump
Plaster Machine
Soil Spraying Machine
Foam Concrete Machine
hydraulic pump station
Customized Service

TEL

86-371-63902781

skype:

machine.machine6

Email

sales@leadcrete.com

FAX

86-371-63526676

ADDRESS

Xisihuan Ring-Road East, Tielu, Xiliu Lake sub-district, Zhongyuan District, Zhengzhou, Henan China

Grout Pump

  • LGP95/165PL-E High Pressure Grouting Pump is an horizontal hydraulic pump used for pumping fluid mixtures, such as cement slurry or bentonite slurry, ect.

  • LGM80/50PLD-E Double-Plunger Hydraulic Grout Pump is suitable for all grouting work, up to 8mm particle size , such as, for the pumping of backfill mortar behind tunnel liners, grouting in soil, earth foundation stabilization, waterproofing, tunnel lining

  • The LGH75/100PI-E high pressure vertical grouting pump is designed and made for permeation grouting, compaction grouting, backfilling grouting, curtain grouting, high pressure split grouting etc, grouting methods.

  • Customized mini type electric grouting pump is a customized mini type grouting pump, mainly used for injecting cement grout tubes, repairing damaged / dangerous structures, consolidating or weatherproofing walls, rocks, dams, and tunnels, pumping special

  • LGH Series High-Pressure Grouting Pump are used for grouting in soil, earth foundation stabilization, waterproofing, tunnel lining, underwater foundations, bridge decks, deep well casing, slope line grouting, etc.

  • LEC grouting pumps provide wide range grouting pressure selection as well as the dependability and durability required on your job site.

  • LEC injection grouting pumps provide wide range grouting pressure selection as well as the dependability and durability required on your job site.

  • Low Pressure Grouting Pump is a kind of Low Pressure Large Output grout pump.

  • The fluid end of high pressure grouting pump adopt the assembly body and the transmission of the power end is the ball bearing with low noise and low temperature, which can keep working continuously for 24 hours.

  • XPB-90 high pressure grout pump mainly applied for high pressure rotation grouting for ground work treatment, curtain grouting, blocking leakage at the mine, anchor at the slope and so on.

  • LSYB70/4 is a dual slurry grouting injection pump, the pump has two separate cylinder to avoid the slurry and sodium silicate to mix inside the cylinder, then the two liquid will be outlet by two hose and mixed outside the pump.

  • LHG-10 Grouting Cement Small Grout Pump---Single cylinder working and ball vavle direct changing, repair and maintain easily.

  • 2LGP series pneumatic grout pumps are driven by compressed air, thus this pump can safely use in the large water drenching and high gas/firedamp places.

  • LEC mud pumps use hydraulic power to convert hydraulic energy into the power that can convey high pressure mud. It’s self-suction plunger pump. The parts without rotation make piston linear motion.

  • LEC mud pumps use hydraulic power to convert hydraulic energy into the power that can convey high pressure mud. It’s self-suction plunger pump. The parts without rotation make piston linear motion.

 22    1 2 Next Last