High quality foam concrete production machine
2021-09-04 13:58:19
High quality foam concrete block production machine
There are two necessary factors for the formation of foam, one is the foaming agent solution, and the other is air, both of which are indispensable. Without the blowing agent solution, the liquid film surrounding the gas would not form, and there would be no bubbles. And without gas, foaming agent solution alone will not form bubbles.
In the bubble formation system, the foaming agent solution is the dispersion medium, the gas is the dispersed phase, and the gas is dispersed in the liquid to form bubbles, and then the foam is composed of numerous bubbles. In addition to the important factor of blowing agent performance, the introduction of gas into the blowing agent solution is another important factor. The introduction of gas into liquid must be done by a high quality foam concrete block production machine.
Lead Equipment Co., Ltd. is a manufacturer of foam concrete block production machine. We are engaged in the research and development, production and sales of foam machine. During the manufacturing process of foam concrete block production machine, we strictly control product quality in accordance with the quality control system. After years of technological development, we have developed the different models of high quality foam concrete block production machine.
LD5 high quality foam concrete block production machine is design for village and county market. It can put directly on the truck for working. It includes a feeder, a mixer, a set of foaming system and a pump, adopts digital control technology, can exactly adjust foam cement density.
At present, our products have already big batch export to overseas market, achieving a historic breakthrough that China cement foam machine from import to export.
It is not enough to only understand the foam concrete block production machine application and principle. It is also necessary to further understand several important technical parameters of the high quality foam concrete block production machine. Take our LD20 foam concrete block production machine as an example:
1) Output: The output is the amount of foam produced. This amount must be slightly higher than 20% of the amount of foam you need to leave room. The amount of foam produced should be the basis for the approved calculation and not the upper limit.
The max theoretical output of LD20 high quality foam concrete block production machine is 20m3/h.
2) Installed capacity: Installed capacity is the total installed power. This parameter is of great significance to the calculation of electrical circuits.
The mixer tank capacity of LD20 high quality foam concrete block production machine is 580L.
3) Equipment size: it is a necessary factor for the overall layout planning of the workshop.
The main part overall dimension of LD20 high quality foam concrete block production machine is 3000*1420*830mm.
Before we send quotation, please let us know the following items:
1. What project you will use the machine do? Wall, floor, roof, or other?
2. What capacity do you need? 5m3/h, 10m3/h, 20m3/h or other?
3. What materials do you use to make foam concrete? Cement, foam agent, water?
4. What is your local voltage? 3phase, 380V, 50Hz is OK for you?
Phone/Wechat
ADDRESS
contacts
+86-18538591025
sales@leadcrete.com
中文
English
Your Position： 
(Live chat).jpg)
.jpg)
Whatsapp
