Your Position: Home > News

Grouting Plant
Grout Mixer and Agitator
Grout Pump
HydroSeeders
Refractory Gunite/Mixer
Shotcrete Machine
Industrial Peristaltic Pump
Foam Concrete Machine
Concrete Mixer
Concrete Pump
Plaster Machine
hydraulic pump station
Customized Service

TEL

86-371-63902781

skype:

machine.machine6

Email

sales@leadcrete.com

FAX

86-371-63526676

ADDRESS

Xisihuan Ring-Road East, Tielu, Xiliu Lake sub-district, Zhongyuan District, Zhengzhou, Henan China

Slurry transfer peristaltic hose pump

2021-03-15 16:05:32

Slurry transfer peristaltic hose pump
Slurry transfer peristaltic hose pump can transport medium: strong abrasive medium, high specific gravity medium, corrosive medium, high solid content medium, shear sensitive medium, metering application, high viscosity medium, high maintenance cost application, long fiber medium, self-priming occasion and crystalline medium. 

When the slurry transfer peristaltic hose pump is running, there will be no shaft seal, bearing or stator failure; Due to the special principle of slurry transfer peristaltic pump, it can also pump all kinds of gas-containing materials without cavitation; The pumped fluid only comes into contact with the rubber hose, so the hose pump can transport all corrosive or abrasive media that rubber can bear; The slurry transfer hose pump can also run in reverse, with less power consumption. Slurry peristaltic hose pump has good metering capacity and can be used as metering pump.

slurry transfer peristaltic hose pump


Application and maintenance of slurry transfer peristaltic hose pump:
1.Check before starting: whether the connectors and fasteners are firm, pressurize them to working pressure with clear water, and check whether there is any leakage in each system.
2. Attention should be paid during startup and operation: the voltage is consistent enough, the rotating speed is uniform, and the sound is normal. If the pump is equipped with other power machines, it should be operated according to the requirements of their operating instructions. When the hose pump is idling (vacuumizing or exhausting), the rotating speed of the pump should not exceed 200 rpm. The working pressure shall not exceed the rated working pressure of slurry hose pump.
3. After use, you must work with clear water for 1-2 minutes, and clean the working cavity and pipeline to avoid damage to the hose caused by residual crystallization of certain liquid.
4. Hose replacement method:
(1) Remove the front end cover, and remove the shaft retaining ring on the roller shaft to remove the roller.
(2) The inlet and outlet nozzles can be taken out by loosening the stiffening hoop, and the U-shaped hose can be taken out of the pump cavity.
(3)The hose installation and replacement can be reversed.

slurry transfer peristaltic pump

 
Lead Equipment Co., Ltd. is a leading manufacturer of slurry transfer peristaltic hose pump, shotcrete machines, grout pumps, concrete pumps and soil seeding machines in China, as well as a unique supplier with ISO 9001:2008, SGS and CE cetificate in above products in China. Our products have been exported to the USA, Canada, UAE, Malaysia, Pakistan, Korea, Bahrain and Nepal. The export amount is up to USD1000,000.00.
     
If you are looking for a suitable slurry peristaltic pump supplier, please contact us directly if you want to work directly with the factory. We will provide you with the best quality products and the best after-sales service. If you have any needs please feel free to contact us, sales@leadcrete.com

■ Inquiry
sales@leadcrete.com86-371-63902781
Your name :
Your tel :
* Your mail :
Your company :
Your country :
* Inquiry :
Quotation sales@leadcrete.com