Your Position: Home > News

Grouting Plant
Grout Mixer and Agitator
Grout Pump
Refractory Gunite/Mixer
Shotcrete Machine
Industrial Peristaltic Pump
Foam Concrete Machine
Concrete Mixer
Concrete Pump
Plaster Machine
hydraulic pump station
Customized Service









Xisihuan Ring-Road East, Tielu, Xiliu Lake sub-district, Zhongyuan District, Zhengzhou, Henan China

Peristaltic hose pump for filter press machine

2022-01-27 18:18:37

Peristaltic pump for filter press machine have a very wide range of uses. It could be widely used in many project, such as architecture, underground construction, petrochemical industry, metallurgy, food industry, ceramic, mining, water treatment, hydrocarbon sludge pumping etc.

peristaltic hose pump for filter press machine

In the past few years, many pumps for slurry transportation used horizontal centrifugal pumps. Its flow-through parts are made of cast iron, and the sealing form is packing seal. And there are many problems during operation:
1. The service life of the wearing parts of the horizontal centrifugal pump is extremely short. Due to the higher pressure in the later stage of ore pressing by the filter press machine. At this time, the supply pressure of the pump is required to be too large, and the wearing parts of the pump bear a large friction load, which accelerates the wear of the wearing parts.
2. The leakage is serious. Packing seal is used, and the medium conveyed by the pump is corrosive. As the supply pressure increases, the sealing performance becomes worse. At the same time, leakage causes metal loss, and leakage of slurry will affect the efficiency of on-site construction.
3. Frequent maintenance and difficult maintenance operations. The pump cavity is full of mineral slurry. In the case of poor sealing, the slurry can easily enter the pump bearings. The pump body is often disassembled, and the shutdown will seriously affect production.
1. The hose pump can transport high-concentration ore slurry without mixing and irrigation to reduce the concentration.
2. Quantitatively convey the slurry, which greatly improves the working efficiency of the filter press machine.
3. Absolutely no leakage. All the medium flows inside the hose. The hoses are made of NR, NBR, EPDM and other materials to meet the transportation needs of various highly corrosive and highly abrasive media.
4. It can guarantee pumping without clogging.
5. Convenient maintenance, greatly reducing operating costs. The only vulnerable part of the hose pump is the hose, and it is easy to replace.

peristaltic pump for filter press machine

Lead Equipment Co., Ltd. is a peristaltic pump for filter press machine manufacturer. Our peristaltic pump are factory direct sale. We have peristaltic pump for filter press machine with different working pressure and output. The working pressure is from 10bar to 26bar, and the output is from 14m3/h to 54m3/h. If customers have any demands, we could provide customized service.

Contact us for hose pump for filter press machine price: 
If you are interested in our peristaltic hose pump, we will recommend a suitable peristaltic hose pump for you. Please help us to confirm the following points:
1. What is the project with our peristaltic pump, is it for pumping concrete or others?
2. What is the pressure and output you require?
3. What is the local voltage you require? Is 380V, 50Hz OK for you?
4. What is Max aggregate size in the slurry?
You can send your requirements to our email, email address:

■ Inquiry
Your name :
Your tel :
* Your mail :
Your company :
Your country :
* Inquiry :
Get Price Now!