Aircrete manufacturing

Aircrete is a new type of building material.  If you are interested in aircrete manufacturing, feel free to contact us. We are aircrete manufacturer. The Aircrete is mechanically completely foamed by the foaming system of the foam concrete machine, and the foam is uniformly mixed with the cement slurry. Then, through the pumping system of the foam concrete machine, a cast-in-place construction or mold forming by natural solidification forms a new lightweight heat insulating material containing a large number of closed cells.

Aircrete, also known as foam cement, lightweight concrete, etc., is a new type of building energy-saving material that is wasteful, environmentally friendly, energy-saving, low-cost, and non-flammable. Aircrete is a concrete product that contains a large number of small closed cells and has considerable strength by chemical or physical introduction of air or nitrogen, carbon dioxide gas, oxygen, etc. into the concrete slurry depending on the application. Aircrete is typically produced by mechanically preparing an aqueous blowing agent into a foam. The specific operation is: mechanically preparing a foaming agent aqueous solution into a foam, and then adding the foam to a slurry composed of a siliceous material, a calcium material, water and various mixtures, and mixing, pouring and solidifying.

As a new type of energy-saving and environmentally-friendly building materials, domestic and foreign scholars have done a lot of research on it, making it widely used in wall materials. The advantages are: low density, light weight, heat preservation, sound insulation, impact resistance and the like. However, it still has some drawbacks such as low strength, cracking, water absorption and the like. Therefore, further expansion of its application areas requires further study of blowing agents, mixing ratios, process flows and equipment. It can be applied to retaining walls, building sports fields and moving tracks, sandwich components, as composite wall panels, pipe backfilling, lean concrete filling, roof slopes, tank foot supports and more.

In order to make aircrete, we need aircrete machines, and we need foaming agents to produce foam. If you are interested in aircrete manufacturing, feel free to contact us. We are aircrete manufacturer.