Your Position: Home > News

Grouting Plant
Grout Mixer and Agitator
Grout Pump
Refractory Gunite/Mixer
Shotcrete Machine
Industrial Peristaltic Pump
Foam Concrete Machine
Concrete Mixer
Concrete Pump
Plaster Machine
hydraulic pump station
Customized Service









Xisihuan Ring-Road East, Tielu, Xiliu Lake sub-district, Zhongyuan District, Zhengzhou, Henan China

Cement grouting machine manufacturer

2021-05-20 20:34:20

Cement grouting machine manufacturer
Lead equipment is a professional cement grouting machine manufacturer, we have many kinds of cement grouting machine for your choice. There are many types of cement grouting machines: hose type grout pump, piston grout pump, plunger grout pump. They could be widely used in tunnels grouting, blocking water in mine mining face; grouting and sealing water in rock roadway and concrete shaft wall; tunnel crack, broken rock mass, reinforcement of scattered rock; anchoring; backfill grouting and prevent surface subsidence, prevent landslides, correct grouting of building deflections, etc.

Cement grouting machine manufacturer

When cement grouting machine using under the mine, the following points need to be noted:
1. Check of the mine grouting environment clean and tidy is safe.
2. Grouting at each location shall not be less than 2 people, 1 person patrol line 1 person to check the grouting at the section of roadway floor heave, near run plasma phenomena.
3. Grouting place to set a special phone, the phone will hang from the roof where no spill without water, mortar, grouting hole distance cannot be more than 10 meters, and ensure smooth communication.
4. Check the orifice tube grouting pump, grouting before, whether the switch freely.
5. Check whether the ball valve is blocked, the ball valve switch is flexible, ball screw, threaded flange plate, grouting tee if there is a down silk, silk thread, the phenomenon such as slide fastener, if any should be replaced in a timely manner.
6. Grouting pump flange connection head screwed on the length of the thread length must be greater than 2 "ball valve, and the connection 2" ball valve on the thread must be full.
7. During the grouting, borehole grouting should work every half hour recording an orifice pressure, and keep in touch with the ground grouting station, underground grouting work must match.
8. Grouting pressure stabilized, instead of a 5-speed grouting.

Cement grouting machine manufacturer

LGM80/50PLD-E double cylinder plunger type cement grouting pump is a perfect machine for grouting projects. Double cylinder design, it makes this machine technology reach to the world leading ones. Max. Flow is 80L/min and max. Pressure is 50bar. Suitable for all grouting work, up to 8mm particle size.

Cement grouting machine manufacturer

Vertical type single cylinder piston cement grout pump are also produced by us. Maxium flow is 75L/min and max pressure is 100bar. Vertical type, more compact design. And this grouting pump design technology is from Italy. And cost performance is very high.

Cement grouting machine manufacturer

As the manufacturer and supplier, the grouting pump flow and pressure could be customized according to your request. You can contact us freely,

■ Inquiry
Your name :
Your tel :
* Your mail :
Your company :
Your country :
* Inquiry :