Home » Grout pump » China Jet Grouting Pump

China Jet Grouting Pump

Discuss your China jet grouting pump requirements with Leadcrete for foundation improvement, tunnel construction, and groundwater control projects. Pump selection should match the required pressure and flow, grout formulation, and operating schedule. Review the pumping unit alongside the mixing plant, high-pressure delivery line, drilling equipment, and site access conditions.

Rated 4.8/5 based on 558 customer reviews
Share:
  Content   2026-11-20

China Jet Grouting Pump

For foundation contractors sourcing a China jet grouting pump, equipment selection starts with matching grout delivery to the construction method. The pump must provide the required flow at the specified pressure while working with the grout preparation plant, high-pressure delivery line, and drilling rig.

Leadcrete’s LGP250/450-260D diesel jet grouting pump provides a containerized pumping solution for projects requiring high-pressure cement grout delivery. Its suitability should be assessed against the proposed injection process, site conditions, and operating schedule.

Jet Grout Pump
Jet Grout Pump

Diesel Power for Construction Sites

The upgraded LGP250/450-260D uses a 260 HP Cummins QSB6.7-260C diesel engine, with a listed maximum engine speed of 2,200 r/min. Its transmission provides four speed ranges.

Diesel drive can be useful where a suitable electrical supply for the main pumping duty is unavailable. Site planning should still cover fuel handling, ventilation, exhaust clearance, and access for engine maintenance.

When requesting a China jet grouting pump, describe the expected daily operating hours and site environment so the proposed arrangement can be reviewed against the working conditions.

Three-Plunger High-Pressure Pumping Unit

The GP250/450 main pump is a reciprocating, single-acting unit with three 75 mm plungers. Its listed maximum output is 250 L/min, and its maximum pressure is 450 bar, equivalent to 45 MPa.

Parameter Latest Upgraded Specification
Model LGP250/450-260D
Diesel engine Cummins QSB6.7-260C
Engine power 260 HP
Maximum engine speed 2,200 r/min
Transmission Hydrodynamic, four speeds
Main pump GP250/450
Pump action Reciprocating, single-acting plunger
Number of plungers 3
Plunger diameter 75 mm
Maximum output 250 L/min
Maximum pressure 450 bar / 45 MPa
Inlet diameter 3 inches
Outlet diameter 1¼ inches
Overall dimensions, L × W × H 5,750 × 2,230 × 2,300 mm
Weight 8,050 kg

Specification note: Published performance data are based on water testing. Maximum pressure and maximum flow should not be assumed to occur simultaneously; confirm the required operating point for the proposed grout.

China Jet Grouting Pump
China Jet Grouting Pump

Match Pressure and Flow to the Injection Duty

A useful purchase specification states the required flow at a defined working pressure. Requesting only a “450 bar pump” leaves an important question unanswered: how much grout must the pump deliver at that pressure?

For your China jet grouting pump enquiry, identify whether pressure is specified at the pump outlet or another measurement point. Delivery distance, elevation, hose diameter, fittings, and grout properties can affect pressure losses.

The operating point should also match the drilling system and nozzle arrangement. Higher pressure alone does not establish the required treatment geometry or finished soil-cement strength.

Coordinate Grout Production with Pump Consumption

An adequately sized mixing plant helps maintain grout supply throughout the injection sequence.

For example, an operating flow of 200 L/min requires 12 m³/h of prepared grout during uninterrupted pumping. This calculation describes consumption at an illustrative duty point; it does not establish a guaranteed pump operating condition.

Assess mixing capacity using the complete production cycle, including dosing, cement feeding, mixing, and transfer. An agitator provides temporary storage and maintains prepared grout, but it cannot compensate indefinitely for a production shortfall.

Plan the Containerized Installation

A containerized China jet grouting pump brings the pumping equipment into a defined installation footprint. Before delivery, confirm lifting arrangements, transport access, ground support, and space for opening service panels.

The site layout must also accommodate suction connections, discharge hoses, operator access, and routine maintenance. Keep the grout supply route practical and provide access for cleaning.

Confirm the supply scope separately. A containerized pump package does not automatically include the grout mixer, agitator, cement silo, or drilling rig.

Review the Complete Jet Grouting System

The pump should be selected alongside the construction method and supporting equipment.

Review Item Information to Confirm
Injection method Fluid arrangement and the duty assigned to this pump
Grout formulation Water-to-cement ratio, additives, and material properties
Delivery line Length, diameter, pressure rating, and connections
Drilling equipment Required flow, pressure, and nozzle arrangement
Monitoring Measurement locations and recording requirements

These checks help prevent a mismatch between individual equipment ratings and the operating needs of the complete system.

Applications in Foundation and Underground Engineering

A China jet grouting pump can form part of an engineered ground improvement system for foundations, underground construction, and seepage control.

Equipment selection should follow the treatment objective and ground conditions. Describe whether the project involves soil-cement columns, overlapping treatment elements, or another specified arrangement. Include the proposed injection sequence and any restrictions on site space.

Final construction parameters and acceptance criteria require project-specific engineering and verification.

Request a China Jet Grouting Pump Proposal

Contact Leadcrete with:

  • Your application and jet grouting method.
  • Required operating pressure and flow.
  • Grout formulation and delivery distance.
  • Working hours and available mixing capacity.
  • Site layout and monitoring requirements.

Email sales@leadcrete.com to discuss the LGP250/450-260D China jet grouting pump and request a configuration suited to your project.

Inquiry
* Name:
* Email:
Country:
Tel:
* Message:
More Grout pump