Home » Planetary concrete mixer » 1 cubic meter planetary concrete mixer

1 cubic meter planetary concrete mixer

1 cubic meter planetary concrete mixer has high mixing uniformity, short mixing cycle, high production efficiency, rich output value models, can be used for laboratory mixing, and can also be used in large production lines.

Rated 4.6/5 based on 556 customer reviews
Share:
  Content   2022-06-06

The 1 cubic meter planetary concrete mixer has high production efficiency and good process applicability. According to the experience data of many years of equipment used in brick making machines, Leadcrete Machinery is used as the basis for the design of the mixing system, so that the application of the configuration of each device of the mixer is reasonable and fully matched, and the selection of materials is reasonable. So the vertical axis planetary mixer has high efficiency and low failure rate.

big capacity planetary concrete mixer
big capacity planetary concrete mixer
Inquiry
* Name:
* Email:
Country:
Tel:
* Message:
More Planetary concrete mixer

Cost-effective planetary mixer for refractory material operation precautions
1. Check the content of Cost-effective planetary mixer for refractory material before operation
1. The power supply voltage and other adapter instruments have a reasonable rise and fall range, and the relevant installation should be guaranteed to be correct.
2. The fastening of each transmission system, drive system and other devices, the layout of the feeding system and gears are complete, and the safety measures are in place.
3. The wiring of relevant equipment is correct and will not cause safety hazards
2. Before the operation of Cost-effective planetary mixer for refractory material, conduct an idling test machine to confirm that there is no abnormality.
3. During the operation of the Cost-effective planetary mixer for refractory material, attention should be paid to abnormal conditions and excessive temperature rise of some components. If a problem occurs, it should be stopped for inspection and repaired until it is normal.
4. For Cost-effective planetary mixer for refractory material, the wearing parts should be replaced in time, and the equipment should be adjusted in time to return to normal state.
5. During the use of Cost-effective planetary mixer for refractory material, it is necessary to ensure that the operator can operate the equipment, and it is strictly forbidden to leave the work position during operation.
6. After each shift of Cost-effective planetary mixer for refractory material is completed, it must be cleaned and cleaned in time, the equipment should be lubricated, and the power supply should be cut off.