concrete pump with mixer

We are industrial peristaltic hose pump manufacturer and supplier for many years and can provide various types of hose pumps. Squeeze concrete pumps are widely used in high-rise buildings, tunnels, water conservancy and other projects and are famous for their low energy consumption and high reliability.

The squeesze type hose concrete pump is a special equipment that uses an extruded hose to transport concrete. Its core advantages are:
Simplified structure: Integrates mixing and pumping functions in one, reducing the equipment footprint and manual operation links;
Wear-resistant and long-life: Adopts high-strength hoses (such as imported Trelleborg materials), which increases the service life by 30% compared with traditional pumps and reduces replacement costs;
Strong adaptability: Can handle concrete with a maximum aggregate particle size of 15mm and a slump of 15-23cm, meeting the needs of secondary structural columns, tunnel linings and other scenarios;
Intelligent control: Supports variable frequency speed regulation and forward and reverse functions, can remotely monitor the operating status, and quickly eliminate pipe blockage faults.

We are a professional industrial hose pump manufacturer and supplier from China, providing industrial-grade, sanitary-grade, mining explosion-proof and other full-scenario hose pumps, with a flow range of [0.1-100m³/h], suitable for 20+ industries such as chemical, food, environmental protection, mining, construction, etc., and support non-standard customization.

Hose type concrete pump with mixer realizes concrete transportation by squeezing elastic hose with roller or slider, without mechanical seal, avoiding leakage risk. The hose is mostly made of wear-resistant rubber or steel wire reinforcement layer, with a service life of up to 3000-5000m³ (depending on working conditions).

Hose concrete pump with mixer is an integrated design of mixing and pumping, which reduces equipment transfer time and improves construction continuity. It can transport materials containing solid particles (maximum particle size < 1/4 of the hose inner diameter), high viscosity, and shear-sensitive materials. The flow rate is stable, and the re-measured volume accuracy is ±1%, which supports laboratory-level measurement requirements. The hose is the only consumable part, and the replacement cycle is long.