Home » Planetary concrete mixer » Pan concrete mixer

Pan concrete mixer

The Pan concrete mixer can be used for a long time in the mixing process of various types of refractories, the number of mixers in the mixer, the quality of the equipment, and the durability of the mixer.

Rated 4.7/5 based on 446 customer reviews
Share:
  Content   2021-12-21

In order to adapt to the stirring process of the whole refractory industry, pan concrete mixer have carried out targeted equipment optimization on the materials of the mixer, the type of stirring device and the stirring speed, regardless of the nature of the refractory material. Body, granules, slurries, etc., even if mixed with a small amount of admixture with a small ratio, can ensure that the proportion of the final mixture is consistent, and the batch difference is zero.
Pan concrete mixer storage bin design L-shaped arrangement, floor warehouse batching machine design, loading machine loading, can store 4 kinds of aggregate at the same time, aggregate measurement is carried out below the ground, the metered material is directly through the flat belt, inclined belt Send to the main unit for mixing. According to the user’s needs, the powder batching system is equipped with two cement silos, one fly ash silo, and one silo silo are respectively sent to the measuring bucket by their respective screw conveyors. The water and liquid admixture is sent to the measuring hopper by a water pump. The device adopts microcomputer control, electronic scale measurement, high measurement accuracy and small error. It has the functions of screen display, proportioning storage, automatic compensation of drop, sandstone moisture content compensation (sand stone moisture meter must be ordered separately), which can realize manual and automatic control of mixing process.
The pan concrete mixer is also equipped with a printer and a four-point monitoring system to achieve centralized control and overall management of the entire device.

Inquiry
* Name:
* Email:
Country:
Tel:
* Message:
More Planetary concrete mixer

Cost-effective planetary mixer for refractory material operation precautions
1. Check the content of Cost-effective planetary mixer for refractory material before operation
1. The power supply voltage and other adapter instruments have a reasonable rise and fall range, and the relevant installation should be guaranteed to be correct.
2. The fastening of each transmission system, drive system and other devices, the layout of the feeding system and gears are complete, and the safety measures are in place.
3. The wiring of relevant equipment is correct and will not cause safety hazards
2. Before the operation of Cost-effective planetary mixer for refractory material, conduct an idling test machine to confirm that there is no abnormality.
3. During the operation of the Cost-effective planetary mixer for refractory material, attention should be paid to abnormal conditions and excessive temperature rise of some components. If a problem occurs, it should be stopped for inspection and repaired until it is normal.
4. For Cost-effective planetary mixer for refractory material, the wearing parts should be replaced in time, and the equipment should be adjusted in time to return to normal state.
5. During the use of Cost-effective planetary mixer for refractory material, it is necessary to ensure that the operator can operate the equipment, and it is strictly forbidden to leave the work position during operation.
6. After each shift of Cost-effective planetary mixer for refractory material is completed, it must be cleaned and cleaned in time, the equipment should be lubricated, and the power supply should be cut off.