Home » Planetary concrete mixer » Self-loading concrete mixer

Self-loading concrete mixer

It can be flexibly used in various production lines for mixing and mixing. The Self-loading concrete mixer is easy to operate and has less maintenance work. Therefore, most customers choose the Self-loading concrete mixer to improve production efficiency and reduce production. cost.

Rated 4.5/5 based on 520 customer reviews
Share:
  Content   2021-12-21

The self-loading concrete mixer has a streamlined profile design for the mixing arm and a special wear protection sleeve designed to reduce the chance of material adhesion and improve the service life of the mixing arm.

After testing, the structure of this mixing arm has been tested. The design of the structure with other stirring arms is doubled over the service life. The scraper arm of the self-loading concrete mixer adopts a reinforced structure design.

The use of good stability, the mixing blade and the bottom scraper blade are all designed into a parallelogram structure (Koneiro patented product), when the mixing blade and the bottom scraper blade of the agitator wear. To a certain degree, the blade is rotated 180 degrees for secondary use, and the stirring arm adopts a clamping block type clamping structure, which can improve the utilization of the doubled blade.

Inquiry
* Name:
* Email:
Country:
Tel:
* Message:
More Planetary concrete mixer

Cost-effective planetary mixer for refractory material operation precautions
1. Check the content of Cost-effective planetary mixer for refractory material before operation
1. The power supply voltage and other adapter instruments have a reasonable rise and fall range, and the relevant installation should be guaranteed to be correct.
2. The fastening of each transmission system, drive system and other devices, the layout of the feeding system and gears are complete, and the safety measures are in place.
3. The wiring of relevant equipment is correct and will not cause safety hazards
2. Before the operation of Cost-effective planetary mixer for refractory material, conduct an idling test machine to confirm that there is no abnormality.
3. During the operation of the Cost-effective planetary mixer for refractory material, attention should be paid to abnormal conditions and excessive temperature rise of some components. If a problem occurs, it should be stopped for inspection and repaired until it is normal.
4. For Cost-effective planetary mixer for refractory material, the wearing parts should be replaced in time, and the equipment should be adjusted in time to return to normal state.
5. During the use of Cost-effective planetary mixer for refractory material, it is necessary to ensure that the operator can operate the equipment, and it is strictly forbidden to leave the work position during operation.
6. After each shift of Cost-effective planetary mixer for refractory material is completed, it must be cleaned and cleaned in time, the equipment should be lubricated, and the power supply should be cut off.

The planetary mixer of Made in China planetary refractory mixer has its own unique production characteristics. Today we will focus on explaining the performance and characteristics of the mixer. Made in China planetary refractory mixer is produced directly at the production base and delivered to the site of use by freight.

Feature 1: Wide application range. Made in China planetary refractory mixer meets different requirements for the manufacture of refractory materials, such as aluminate refractory cement, low calcium aluminate refractory cement, calcium magnesium aluminate cement, etc. The refractory cement mixer is developed based on the planetary mixer. It is a piece of mixing equipment manufactured according to the characteristics of refractory materials and production conditions. It can not only be used for the production of refractory materials, but also for building materials, ceramic ceramic, the chemical industry, environmental protection (fly ash solidification), and other industries to meet the diversified production needs of users.

Feature 2: Comprehensive cost performance is high. Refractory production projects, it has the advantages of small investment and quick returns. The investment cost can be recovered in a short time, and equipment idleness and resource waste can be avoided.

Feature 3: Easy to use and install, easier to arrange in the production line, small footprint, can be used in conjunction with other equipment, low energy consumption, simple structure, flexible opening and opening of the inspection door, which is convenient for personnel to enter for inspection and replacement of accessories.

Feature 4: The use time is long, the vulnerable parts are reinforced with high wear-resistant materials, and the internal mixing tools and liner materials can be selected accordingly.