Home » Planetary concrete mixer » planetary concrete mixer for UHPC Ultra-High Performance Concrete

planetary concrete mixer for UHPC Ultra-High Performance Concrete

The planetary concrete mixer for UHPC Ultra-High Performance Concrete is independently revolved and rotated by the mixing planets. One or more planets are installed in a mixer. They perform balanced mixing and release the average energy to complete the highly uniform mixing work. The mixer will be equipped with a wall scraper.

Rated 4.6/5 based on 591 customer reviews
Share:
  Content   2022-05-13

The planetary concrete mixer for UHPC Ultra-High Performance Concrete is similar to the design of the disc flat mixer, which is suitable for the planetary working mode. With the design of the single motor structure, the high-intensity mixing is matched with the reasonable and stable equipment operation, and the high-efficiency working efficiency of the mixer is continuous and stable.

planetary refractory mixing mixer
planetary refractory mixing mixer
Inquiry
* Name:
* Email:
Country:
Tel:
* Message:
More Planetary concrete mixer

Cost-effective planetary mixer for refractory material operation precautions
1. Check the content of Cost-effective planetary mixer for refractory material before operation
1. The power supply voltage and other adapter instruments have a reasonable rise and fall range, and the relevant installation should be guaranteed to be correct.
2. The fastening of each transmission system, drive system and other devices, the layout of the feeding system and gears are complete, and the safety measures are in place.
3. The wiring of relevant equipment is correct and will not cause safety hazards
2. Before the operation of Cost-effective planetary mixer for refractory material, conduct an idling test machine to confirm that there is no abnormality.
3. During the operation of the Cost-effective planetary mixer for refractory material, attention should be paid to abnormal conditions and excessive temperature rise of some components. If a problem occurs, it should be stopped for inspection and repaired until it is normal.
4. For Cost-effective planetary mixer for refractory material, the wearing parts should be replaced in time, and the equipment should be adjusted in time to return to normal state.
5. During the use of Cost-effective planetary mixer for refractory material, it is necessary to ensure that the operator can operate the equipment, and it is strictly forbidden to leave the work position during operation.
6. After each shift of Cost-effective planetary mixer for refractory material is completed, it must be cleaned and cleaned in time, the equipment should be lubricated, and the power supply should be cut off.