Home » Planetary concrete mixer » 1 cubic concrete mixer

1 cubic concrete mixer

The 1 cubic concrete mixer has a compact structure, convenient and flexible operation. Under the action of the planetary operation mode, the material revolves and rotates with the stirring device. This mode of operation greatly reduces the time for material mixing.

Rated 4.8/5 based on 318 customer reviews
Share:
  Content   2022-01-25

The 1 cubic concrete mixer has a compact structure, convenient and flexible operation. Under the action of the planetary operation mode, the material revolves and rotates with the stirring device. This made of operation greatly reduces the time for material mixing.
The mixing resistance increases accordingly, the whole mixing process is very smooth, there is no stagnation, the mixing effect is good, the produced materials do not segregate and agglomerate, and the phenomenon of holding the shaft and holding the arms is rare. To a certain extent, the uniform mixing effect of concrete materials can be achieved.

Inquiry
* Name:
* Email:
Country:
Tel:
* Message:
More Planetary concrete mixer

Cost-effective planetary mixer for refractory material operation precautions
1. Check the content of Cost-effective planetary mixer for refractory material before operation
1. The power supply voltage and other adapter instruments have a reasonable rise and fall range, and the relevant installation should be guaranteed to be correct.
2. The fastening of each transmission system, drive system and other devices, the layout of the feeding system and gears are complete, and the safety measures are in place.
3. The wiring of relevant equipment is correct and will not cause safety hazards
2. Before the operation of Cost-effective planetary mixer for refractory material, conduct an idling test machine to confirm that there is no abnormality.
3. During the operation of the Cost-effective planetary mixer for refractory material, attention should be paid to abnormal conditions and excessive temperature rise of some components. If a problem occurs, it should be stopped for inspection and repaired until it is normal.
4. For Cost-effective planetary mixer for refractory material, the wearing parts should be replaced in time, and the equipment should be adjusted in time to return to normal state.
5. During the use of Cost-effective planetary mixer for refractory material, it is necessary to ensure that the operator can operate the equipment, and it is strictly forbidden to leave the work position during operation.
6. After each shift of Cost-effective planetary mixer for refractory material is completed, it must be cleaned and cleaned in time, the equipment should be lubricated, and the power supply should be cut off.