Home » Planetary concrete mixer » Planetary type cement mixer machine for refractory castable

Planetary type cement mixer machine for refractory castable

Planetary type cement mixer machine for refractory castable needs to have: fully stir the polystyrene particles and the slurry material, and mix them into the slurry material without agglomeration and dry material. The mixed and discharged mortar material must also be stable, and no bleeding occurs, separation.

Rated 4.8/5 based on 469 customer reviews
Share:
  Content   2022-08-14

The mixing trajectory of the planetary type cement mixer machine for refractory castable can ensure that the mixing and covering of the mixing drum can be achieved within 30 seconds, which mainly depends on the design of the mixing device of the vertical shaft planetary mixer. The layers are covered, dense and continuous, which lays the foundation for the complete stirring of the polystyrene particles.

Inquiry
* Name:
* Email:
Country:
Tel:
* Message:
More Planetary concrete mixer

Cost-effective planetary mixer for refractory material operation precautions
1. Check the content of Cost-effective planetary mixer for refractory material before operation
1. The power supply voltage and other adapter instruments have a reasonable rise and fall range, and the relevant installation should be guaranteed to be correct.
2. The fastening of each transmission system, drive system and other devices, the layout of the feeding system and gears are complete, and the safety measures are in place.
3. The wiring of relevant equipment is correct and will not cause safety hazards
2. Before the operation of Cost-effective planetary mixer for refractory material, conduct an idling test machine to confirm that there is no abnormality.
3. During the operation of the Cost-effective planetary mixer for refractory material, attention should be paid to abnormal conditions and excessive temperature rise of some components. If a problem occurs, it should be stopped for inspection and repaired until it is normal.
4. For Cost-effective planetary mixer for refractory material, the wearing parts should be replaced in time, and the equipment should be adjusted in time to return to normal state.
5. During the use of Cost-effective planetary mixer for refractory material, it is necessary to ensure that the operator can operate the equipment, and it is strictly forbidden to leave the work position during operation.
6. After each shift of Cost-effective planetary mixer for refractory material is completed, it must be cleaned and cleaned in time, the equipment should be lubricated, and the power supply should be cut off.