Home » Planetary concrete mixer » Diesel engine planetary concrete mixer trucks cement mix

Diesel engine planetary concrete mixer trucks cement mix

The diesel engine planetary concrete mixer trucks cement mix has stable structure and reliable equipment quality. For the same material and the same production environment, the material after mixing is more in line with the standard and the material is stable.

Rated 4.6/5 based on 283 customer reviews
Share:
  Content   2022-09-14

The diesel engine planetary concrete mixer trucks cement mix is used for planetary stirring, and the device with side scraper is used. The operating range of the stirring device covers all stirring areas. The stepless speed-adjusting stirring mode can carry out more stirring processes, which can fully stir the materials that are difficult to stir together. And unloading will not produce segregation, to ensure the stability of the composition of the new mixing material.

Inquiry
* Name:
* Email:
Country:
Tel:
* Message:
More Planetary concrete mixer

Cost-effective planetary mixer for refractory material operation precautions
1. Check the content of Cost-effective planetary mixer for refractory material before operation
1. The power supply voltage and other adapter instruments have a reasonable rise and fall range, and the relevant installation should be guaranteed to be correct.
2. The fastening of each transmission system, drive system and other devices, the layout of the feeding system and gears are complete, and the safety measures are in place.
3. The wiring of relevant equipment is correct and will not cause safety hazards
2. Before the operation of Cost-effective planetary mixer for refractory material, conduct an idling test machine to confirm that there is no abnormality.
3. During the operation of the Cost-effective planetary mixer for refractory material, attention should be paid to abnormal conditions and excessive temperature rise of some components. If a problem occurs, it should be stopped for inspection and repaired until it is normal.
4. For Cost-effective planetary mixer for refractory material, the wearing parts should be replaced in time, and the equipment should be adjusted in time to return to normal state.
5. During the use of Cost-effective planetary mixer for refractory material, it is necessary to ensure that the operator can operate the equipment, and it is strictly forbidden to leave the work position during operation.
6. After each shift of Cost-effective planetary mixer for refractory material is completed, it must be cleaned and cleaned in time, the equipment should be lubricated, and the power supply should be cut off.