Home » Planetary concrete mixer » Concrete mixer vertical planetary

Concrete mixer vertical planetary

Concrete mixer vertical planetary is a kind of stirring equipment with high technical content. The mixing uniformity can reach 100%. There are no problems with the general mixer. The fault condition is that there is no dead angle in the stirring, and there is no slurry leakage in the shaft head.

Rated 4.5/5 based on 381 customer reviews
Share:
  Content   2021-12-21

In the block production process, the raw materials are mixed and stirred until uniform and reasonable fineness can be pressed and formed.
If the mixing uniformity of concrete mixer electric beton mixer is not enough, for example, the permeable brick fabric is unevenly stirred, and the brick surface is easy to pilling and uneven, then the produced the qualified rate of the block products is low, causing unnecessary production losses to the users. The concrete mixer electric beton mixer has high mixing quality and completely avoids the above problems.

Inquiry
* Name:
* Email:
Country:
Tel:
* Message:
More Planetary concrete mixer

Cost-effective planetary mixer for refractory material operation precautions
1. Check the content of Cost-effective planetary mixer for refractory material before operation
1. The power supply voltage and other adapter instruments have a reasonable rise and fall range, and the relevant installation should be guaranteed to be correct.
2. The fastening of each transmission system, drive system and other devices, the layout of the feeding system and gears are complete, and the safety measures are in place.
3. The wiring of relevant equipment is correct and will not cause safety hazards
2. Before the operation of Cost-effective planetary mixer for refractory material, conduct an idling test machine to confirm that there is no abnormality.
3. During the operation of the Cost-effective planetary mixer for refractory material, attention should be paid to abnormal conditions and excessive temperature rise of some components. If a problem occurs, it should be stopped for inspection and repaired until it is normal.
4. For Cost-effective planetary mixer for refractory material, the wearing parts should be replaced in time, and the equipment should be adjusted in time to return to normal state.
5. During the use of Cost-effective planetary mixer for refractory material, it is necessary to ensure that the operator can operate the equipment, and it is strictly forbidden to leave the work position during operation.
6. After each shift of Cost-effective planetary mixer for refractory material is completed, it must be cleaned and cleaned in time, the equipment should be lubricated, and the power supply should be cut off.